How Join Yarn Knitting

Yarn knitting is a fun way to use your new Yarn Knitter Skill. Try your luck and join the club! There are many worldwide competitions where you can win money by joining the elite group of yarn knitters.

Join Yarn Knitting is not for the faint of heart, as it can be very time consuming and/or difficult to join at times. But if you have the patience, give yourself a grace period, and work at your goal, you will be rewarded with a nice reward such as a new favorite project or just plain enjoyment of knitted fabrics.

Make a loose knot with the end of the yarn

how join yarn knitting

Now that you have joined yarn knitting, the next step is making a tight knot to hold your new yarn in place.

Making a tight knot is another difficult part of joining two pieces of yarn. Most people get there by taking some extra length of the new yarn and putting it in a circle, then pulling up and off of that.

This takes practice, but after trying it a few times you will get the hang of it.

Once you get the hang of it, joining two pieces of yarn will be fun and quick! You can use one piece as your working piece and the other as holding piece.

Slide the knot onto the needle

how join yarn knitting

Now, take the needle back through the left front of your left sock and pull it through the right front of your right sock.

This is where the tutorial says to slide the knot onto the needle. If you did it right, your socks will slide on easily!

If you missed this step, do it later! Your project will not be as nice.

Now, pull up the top edge of your sock, leaving a bit of fabric on the needle. This is where you will slide your second sock on! Again, if you did this correctly, your socks will come off easily.

Hold the needle parallel to the other needle

how join yarn knitting

When knitting on a knit reverse, your thumb must be next to the needle when you cast the second loop of yarn.

This is because the first row of knitting will be a purl row, and your thumb needs to slide on the second to last finger hole. If you have trouble with this, use fewer stitches per inch and increase or decrease by two stitches at a time.

More difficult versions of join yarn can be complicated. Some methods such as slip stitching require more extensive training and experience. Join yarn can also be worked as an inch or two of new yarn is joined with an existing piece!

Some people use join yarn as a sign that they have completed a project.

Wrap the new piece of yarn around both needles twice

how join yarn knitting

Instead of just beginning to wrap the new yarn around the two needles, begin immediately. This makes the process more efficient and dynamic. By starting immediately, you will be able put some tension on the yarn as you wrap.

How to Join Yarn Knitting: Start Kneading Now

Join-as-you-purl is the best way to start working with yarn. Using this method, you will have your first few mishaps when your yarn does not want to join up with your project.

How to Join Yarn Knitting: Begin Kneading as Soon as You Pick Up Your Needle

When joining new pieces of yarn, begin wrapping as soon as you pick up your needle. This will prevent yourself from beginning a new round on one end of the piece and having to start over because of a lack of finished product.

Slide the new piece of yarn down to join it with the old piece

how join yarn knitting

Now, if you are joining new yarn to old yarn, you have to slide the new piece of yarn down to join it with the old. If you are joining new thread to old thread, take your scissors and cut a small piece of new yarn about one inch long.

Put the cut end into one end of the newly joined piece and then pull it out until it is one length. This will create a hole in the top of the sock where the new length will go.

If you are joining old thread to new thread, take your needle and turn those two pieces of thread around so they are now together. Take your scissors and cut a small bit off of each piece, making them look like two tiny needles. Put these together and then pull out firmly until they join.

Keep knitting!

how join yarn knitting

Even though you are finished making a piece of knitting, you can keep working on it until you are happy with the results. This is a great way to continue to learn new techniques and skills while getting some relaxing time away from your knitting.

Many people do this to help pay for their new hobby. Knitters spend hours sitting and learning techniques and spending money on supplies is helpful for that. It also links well with other knitterā€™s groups and communities so you can exchange tips and tricks.

You can also do this as a way to relax after work or during your busy week. Many people start their day by starting to knit or singing little songs as they work on their project. This helps them wind down after the long day of work or technology-free downtime makes them feel better mentally and physically.

Trim excess yarn after project is complete

how join yarn knitting

When you have completed a project, it is time to let the yarn relax. Let it fall where it will and take a break. This can be done on a floor, in a shop, or in front of a spinning wheel.

When you have completed the project and removed the yarn from the project, then it is time to let the yarn relax. Allow it to cool down before wrapping or mailing your project.

When you have finished working with your yarn and stored your projects away, then it is time to trim back the excess yarn. This can be done by using two sharp scissors or by pulling out some of the original thread with another piece of fabric.

Taking care of your yarn will prevent hairline breaks in your projects and increased lifespan for your projects as well.

Use a different joining method

how join yarn knitting

When knitted fabrics are joined, it can be done in a few different ways. There are many ways to join knits, so there is no need to stick with just one method.

There are several joining techniques such as the Lark/Zinc, the Backpashlk/Backing, and the Crochet/Closing. Each of these methods has its own pros and cons.

The Lark/Zinc is similar to a seamless join but uses an extra yarn thread instead of only one needle. The Backpashlk/Backing is similar to a crocheted join but uses more rows than the Zinc join. The Crochet/Closing is similar to a crochet stitch and connects two pieces using the new loop created.

Leave a Reply

Your email address will not be published. Required fields are marked *

Michael Bourdon

Michael Bourdon


Best Knitting machine

View Other Models

Boye Knitting Needles


4Pcs Spiral Cable Knitting Needle with Storage Box


A Treasury of Knitting Patterns


JCBIZ Knitting Counter Knitting Gauge Converter 150x150mm Knitting Stitch Calculator and Counting Frame Ruler


CHIAOGOO 7040-11 40-Inch Red Lace Stainless Steel Circular Knitting Needles


Beginning Knitting for Left-Handed Knitters

Click on ‘Buy Now’ to find price